Push-fit connectors & fittings
Quick&Easy push-fit connectors for tubing with 1/4", 5/16" and 3/8" outside diameter: straight connectors, 90° elbows, tees and Y pieces as well as adapters with female (IG) or male (AG) thread. Push the tube in up to the stop, fit the locking clip – done. A size such as “1/4" × 3/8" IG” means: 1/4" tube to 3/8" female thread.
95 Item
from 10 pcs: €4.48 each
from 10 pcs: €2.60 each
from 10 pcs: €2.60 each
* Prices include VAT, plus shipping costs.
Buying push-fit connectors: how to find the right fitting
Quick&Easy push-fit connectors join tubes without tools – in reverse osmosis systems, water filters, side-by-side fridges and aquariums. To choose, you need three details: the tube size, the shape and – if the connector is screwed onto a device – the thread.
1. Tube size
What matters is the outside diameter of the tube. The easiest way to measure it is with a calliper.
| Size | Outside diameter of the tube |
|---|---|
| 1/4" | 6.35 mm |
| 5/16" | 7.9 mm |
| 3/8" | 9.5 mm |
Matching tubes in all three sizes are available under PE tubing. Explained in detail in our guide Tube sizes 1/4", 5/16" and 3/8": which connector fits?
2. Shape
- Straight – join two tubes: straight Quick&Easy connector, stem connector.
- L elbow 90° – when the tube has to go round a tight corner: L connector Quick&Easy, series 003, series 004.
- T piece – split one line into two: T connector Quick&Easy, T connector fitting.
- Y piece – three-way branch: 3-way Y connector.
- Bulkhead connector – lead a tube through a wall, lid or housing: bulkhead push-fit connector.
3. Thread: male or female
If the connector is screwed onto a filter housing, an inline filter or a tap, the thread matters. AG (male thread) means the connector is screwed into a female thread. IG (female thread) means the connector is screwed onto a male thread. The description “1/4" × 3/8" IG” means: push-fit for 1/4" tube and 3/8" female thread.
- With male thread: straight connector with male thread, with O-ring for example CP-012-A+O and the set of 2 for inline filters.
- With female thread: straight connector with female thread, 1/4" × 1/2" female.
Connectors with an O-ring seal the thread without PTFE tape. Seal threads without an O-ring with a few turns of PTFE tape on the male thread. Not sure which thread you have? Compare it with an existing fitting or send us a photo.
Installation in three steps
- Cut straight: cut the tube at a right angle, ideally with the tube cutter. A slanted or squashed cut can leak.
- Push in fully: push the tube firmly into the push-fit until it stops.
- Secure: fit the locking clip.
To release: shut off the water, release the pressure, remove the clip, press in the collet on the connector and pull the tube out.
Frequently asked questions about push-fit connectors
What size is my tube?
Measure the outside diameter: about 6.35 mm is 1/4", about 7.9 mm is 5/16" and about 9.5 mm is 3/8".
Do the connectors fit tubes from other manufacturers?
Yes, if the outside diameter matches and the tube is rigid, for example a PE tube. Soft hoses are not suitable for push-fit connectors.
Can I release a push-fit connection again?
Yes. Shut off the water, remove the clip, press in the collet on the connector and pull the tube out. If the tube end is damaged, cut it straight before pushing it in again.
Do I need PTFE tape?
Only for threads without an O-ring. Connectors with an O-ring seal without PTFE tape.
What do AG and IG mean?
AG stands for male thread (Außengewinde), IG for female thread (Innengewinde). A connector with a male thread is screwed into a female thread, one with a female thread onto a male thread.
The connection drips – what should I do?
Check that the tube is cut straight, pushed in fully and that the clip is in place. If it drips at the thread, seal the thread with PTFE tape or use a connector with an O-ring.
Need help choosing?
We will be happy to help you find the right product.